Base ReflectivityBase Reflectivity is the default image. Taken from the lowest (½° elevation) slice, it is the primary image used to "see what's out there". There are two versions of Base Reflectivity image; the short range version which extends out to 124 nautical miles (143 statute miles/230 kilometers) and the long range version which extends out to 248 nautical miles (285 statute miles/460 kilometers). This image is available upon completion of the ½° elevation scan during each volume scanLayer Composite Reflectivity AverageThis WSR-88D radar product displays the average reflectivities for a layer. Data is taken from all elevation angles contained in a given layer for each grid box. It is available for 3 layers (low, mid, high). It is used to aid in determining storm intensity trends by comparing mid level layer composite products with a low level elevation angle base reflectivity product and aid in routing air traffic.Layer Composite Reflectivity MaximumThis WSR-88D radar product displays the maximum reflectivities for a layer. Data is taken from all elevation angles contained in a given layer for each grid box. It is available for 3 layers (low, mid, high). Currently, the low layer extends from the surface to 24,000 feet, the mid layer extends from 24,000 feet to 33,000 feet, and high layer extends above 33,000 feet. It is used to aid in determining storm intensity trends by comparing mid level layer composite products with a low level elevation angle base reflectivity product and aid in routing air traffic.Radar ReflectivityThe sum of all backscattering cross-sections (e.g., precipitation particles) in a pulse resolution volume divided by that volume. The radar reflectivity can be related to the radar reflectivity factor through the dielectric constant term |K|^2, and the radar wavelength.Radar Reflectivity Factor (z)z = the sum (over i) of (N_i * D_i^6), where N_i is the number of drops of diameter D_i in a pulse resolution volume. Note that z may be expressed in linear or logarithmic units. The radar reflectivity factor is simply a more meteorologically meaningful way of expressing the radar reflectivity.ReflectivityUsually a reference to Radar Reflectivity; the sum of all backscattering cross-sections (e.g., precipitation particles) in a pulse resolution volume divided by that volume. The radar reflectivity can be related to the radar reflectivity factor through the dielectric constant term |K|^2, and the radar wavelength.Reflectivity Cross SectionThis WSR-88D radar product displays a vertical cross section of reflectivity on a grid with heights up to 70,000 feet on the vertical axis and distance up to 124 nm on the horizontal axis. Cross Section is similar to the Range Height Indicator (RHI) slices observed on conventional radar, but it is not limited to alignments along the radar radials. Instead the 2 end points are operator selected anywhere within 124 nm of the radar that are less than 124 nm apart. It is used to:
1) Examine storm structure features such as overhang, tilt, Weak Echo Regions (WER), and Bounded Weak Echo Regions (BWER);
2) Estimate height of higher dBZ's and echo tops; and
3) Locate the bright band (where snow is melting and becoming rain).Reflectivity FactorThe result of a mathematical equation (called the Weather Radar Equation) that converts the analog power (in Watts) received by the radar antenna into a more usable quantity. The reflectivity factor (denoted by Z) takes into account several factors, including the distance of a target from the radar, the wavelength of the transmitted radiation, and certain assumptions about the kind and size of targets detected by the radar. The reflectivity factor ranges over several orders of magnitudes, so it is usually expressed on a logarithmic scale called dBZ (decibels of reflectivity).
You can either type in the word you are looking for in the box below or browse by letter.
Search:
Browse by letter:
# A B C D E F G H I J K L M N O P Q R S T U V W X Y Z